logo logo
Українською English

Вхід

Логін
Пароль
Зареєструватися 

Корисні посилання

tntu logo
 
GoogleScholarLogo
 
 
logo


Substantiation of constructive parameters of a frame structure elements of the rope mechanism transport system for storing piece loadings into small warehouses

НазваSubstantiation of constructive parameters of a frame structure elements of the rope mechanism transport system for storing piece loadings into small warehouses
Назва англійськоюSubstantiation of constructive parameters of a frame structure elements of the rope mechanism transport system for storing piece loadings into small warehouses
АвториRoman Hevko; Yurii Nykerui; Taras Dovbush; Vasyl Oleksyuk
ПринадлежністьTernopil Ivan Puluj National Technical University, Ternopil, Ukraine
Бібліографічний описSubstantiation of constructive parameters of a frame structure elements of the rope mechanism transport system for storing piece loadings into small warehouses / Roman Hevko; Yurii Nykerui; Taras Dovbush; Vasyl Oleksyuk // Scientific Journal of TNTU. — Tern.: TNTU, 2020. — Vol 100. — No 4. — P. 62–74.
Bibliographic description:Hevko R.; Nykerui Yu.; Dovbush T.; Oleksyuk V. (2020) Substantiation of constructive parameters of a frame structure elements of the rope mechanism transport system for storing piece loadings into small warehouses. Scientific Journal of TNTU (Tern.), vol 100, no 4, pp. 62–74.
УДК

621.867.42 

Ключові слова

rope mechanism, design parameters, clamping levers, support rollers, turning angles.

The article provides a theoretical substantiation of the structural parameters of the frame structure for the placement of piece loads, as well as clamping levers with rollers and their arrangement, which interact with the inner surface of the guide ropes of the developed transport system. The established limits of rational parameters and angular positions of levers and their compression springs to the inclined sidewalls for the right and left sides of the movable elements of the frame structure relative to the central vertical axis, as well as the angle of the guide ropes to the horizon. On the basis of the results of calculations and recommendations for the choice of parameters of the proposed technical solutions, a rope mechanism for storing piece loadings into small warehouses was manufactured and preliminary experimental studies were carried out.

ISSN:2522-4433
Перелік літератури
  1. Hevko R. B., Klendii M. B., Klendii O. M. (2016), Investigation of a transfer branch of a flexible screw conveyer, INMATEH: Agricultural Engineering, vol. 48, no.1, pp. 29–34.
  2. Lyashuk O. L., Rogatynska O. R., Serilko D. L., (2015), Modelling of the vertical screw conveyer loading, INMATEH Agricultural Engineering, vol. 45, no.1, pp. 87–94.
  3. Baranovsky V. M., Hevko R. B., Dzyura V. O., Klendii O. M., Klendii M. B., Romanovsky R. M., (2018), Justification of rational parameters of a pneumoconveyor screw feeder, INMATEH: Agricultural engineering, vol. 54, no. 1, pp. 15–24.
  4. Hevko R. B., Zalutskyi S. Z., Hladyo Y. B. Tkachenko I. G. Lyashuk O. L., Pavlova O. M, Pohrishchuk B. V., Trokhaniak O. M., Dobizha N. V., (2019), Determination of interaction parameters and grain material flow motion on screw conveyor elastic section surface, INMATEH: Agricultural engineering. Bucharest, Romania, vol. 57, no. 1. pp. 123–134.
  5. Dovbush T, Khomuk N., Dovbush A., Rubinets N. (2017) Mathematical model of boundary crack propagation at bending of symmetric thin-walled flanks. Scientific Journal of TNTU (Tern.), vol. 86, no. 2, pp. 67–75.
  6. Tson A., Baranovskyi V., Lyashuk O., Dovbush T. (2018) Experimental researches of parameters technological process of the improved beets tops purifier. Scientific Journal of TNTU (Tern.), vol. 92, no. 4, pp. 60–67.
  7. Hevko R. B., Yazlyuk B. O., Liubin M. V., Tokarchuk O. A., Klendii O. M., Pankiv V. R., (2017), Feasibility study of mixture transportation and stirring process in continuous-flow conveyors, INMATEH: Agricultural Engineering, vol. 51, no. 1, pp. 49–59.
  8. Hevko R. B., Liubin M. V., Tokarchuk O. A., Lyashuk O. L., Pohrishchuk B. V., Klendii O. M., (2018), Determination of the parameters of transporting and mixing feed mixtures along the curvilinear paths of tubular conveyors, INMATEH: Agricultural Engineering, vol. 55, no. 2, pp. 97–104.
  9. Lyashuk O., Vovk Y., Sokil B., Klendii V., Ivasechko R., Dovbush T. Mathematical model of a dynamic process of transporting a bulk material by means of a tube scraping conveyor Agricultural Engineering International: CIGR Journal, Volume 21, Issue 1, 2019, pp. 74–81.
  10. Mel’nychuk S. L., Hevko B. M., Diachun A. Y., Dzyura V. O., Skyba O. P., (2017), Investigation of the dynamics of unloading the sapropel from a bucket of a cable installation, INMATEH: Agricultural Engineering, vol. 52, no. 2, pp. 55–61.
  11. Lyashuk, O. L., Kolesnik, O. A., Melnichuk, S. L. Teoretichne doslIdzhennya pIdvIsnih mehanIzmIv pIdnImalno-transportnih lebIdok. NaukovI notatki. Vip. 53. 2016. LNTU. Lutsk. Р. 97–102.
  12. Gevko R. B., Nikeruy Yu. S. Eksperimentalna ustanovka ta metodika provedennya doslIdzhen kanatnogo mehanIzmu dlya zavantazhennya malih skladskih primIschen yablukami u tarI. NaukovI notatki. Vip. 67. LNTU. 2019. Lutsk. Р. 29–33.
  13. Gevko R. B., Nikeruy Yu. S., Dovbush T. A. Rezultati eksperimentalnih doslIdzhen kanatnogo mehanIzmu dlya zavantazhennya malih skladskih primIschen ovochami I fruktami u tarI. SIlskogospodarskI mashini. Vip. 45. 2020. LNTU. Lutsk. Р. 45–56.
  14. Rogatinskiy R. M. Kanatniy mehanIzm zavantazhennya skladskogo primIschennya. Patent UkraYini na korisnu model № 125377 MPK B 65 G 7/08, 25/00 / R. M. Rogatinskiy, Yu. S. Nikeruy, R. B. Gevko, I. G. Tkachenko. Zayavka № u201711503. Zayavl. 24.11.2017. Opubl. 10.05.2018. Byul. № 9.
  15. Nikeruy Yu. S. Kanatniy mehanIzm dlya zavantazhennya skladskogo primIschennya. Patent UkraYini na korisnu model № 130576 MPK B 65 G 7/00 / Yu. S. Nikeruy, R. B. Gevko, I. G. Tkachenko,
    B. V. PogrIschuk, N. V. DobIzha. Zayavka № u201807507. Zayavl. 04.07.2018. Opubl. 10.12.2018. Byul. № 23.
References:
  1. Hevko R. B., Klendii M. B., Klendii O. M. (2016), Investigation of a transfer branch of a flexible screw conveyer, INMATEH: Agricultural Engineering, vol. 48, no.1, pp. 29–34.
  2. Lyashuk O. L., Rogatynska O. R., Serilko D. L., (2015), Modelling of the vertical screw conveyer loading, INMATEH Agricultural Engineering, vol. 45, no.1, pp. 87–94.
  3. Baranovsky V. M., Hevko R. B., Dzyura V. O., Klendii O. M., Klendii M. B., Romanovsky R. M., (2018), Justification of rational parameters of a pneumoconveyor screw feeder, INMATEH: Agricultural engineering, vol. 54, no. 1, pp. 15–24.
  4. Hevko R. B., Zalutskyi S. Z., Hladyo Y. B. Tkachenko I. G. Lyashuk O. L., Pavlova O. M, Pohrishchuk B. V., Trokhaniak O. M., Dobizha N. V., (2019), Determination of interaction parameters and grain material flow motion on screw conveyor elastic section surface, INMATEH: Agricultural engineering. Bucharest, Romania, vol. 57, no. 1. pp. 123–134.
  5. Dovbush T, Khomuk N., Dovbush A., Rubinets N. (2017) Mathematical model of boundary crack propagation at bending of symmetric thin-walled flanks. Scientific Journal of TNTU (Tern.), vol. 86, no. 2, pp. 67–75.
  6. Tson A., Baranovskyi V., Lyashuk O., Dovbush T. (2018) Experimental researches of parameters technological process of the improved beets tops purifier. Scientific Journal of TNTU (Tern.), vol. 92, no. 4, pp. 60–67.
  7. Hevko R. B., Yazlyuk B. O., Liubin M. V., Tokarchuk O. A., Klendii O. M., Pankiv V. R., (2017), Feasibility study of mixture transportation and stirring process in continuous-flow conveyors, INMATEH: Agricultural Engineering, vol. 51, no. 1, pp. 49–59.
  8. Hevko R. B., Liubin M. V., Tokarchuk O. A., Lyashuk O. L., Pohrishchuk B. V., Klendii O. M., (2018), Determination of the parameters of transporting and mixing feed mixtures along the curvilinear paths of tubular conveyors, INMATEH: Agricultural Engineering, vol. 55, no. 2, pp. 97–104.
  9. Lyashuk O., Vovk Y., Sokil B., Klendii V., Ivasechko R., Dovbush T. Mathematical model of a dynamic process of transporting a bulk material by means of a tube scraping conveyor Agricultural Engineering International: CIGR Journal, Volume 21, Issue 1, 2019, pp. 74–81.
  10. Mel’nychuk S. L., Hevko B. M., Diachun A. Y., Dzyura V. O., Skyba O. P., (2017), Investigation of the dynamics of unloading the sapropel from a bucket of a cable installation, INMATEH: Agricultural Engineering, vol. 52, no. 2, pp. 55–61.
  11. Lyashuk, O. L., Kolesnik, O. A., Melnichuk, S. L. Teoretichne doslIdzhennya pIdvIsnih mehanIzmIv pIdnImalno-transportnih lebIdok. NaukovI notatki. Vip. 53. 2016. LNTU. Lutsk. Р. 97–102.
  12. Gevko R. B., Nikeruy Yu. S. Eksperimentalna ustanovka ta metodika provedennya doslIdzhen kanatnogo mehanIzmu dlya zavantazhennya malih skladskih primIschen yablukami u tarI. NaukovI notatki. Vip. 67. LNTU. 2019. Lutsk. Р. 29–33.
  13. Gevko R. B., Nikeruy Yu. S., Dovbush T. A. Rezultati eksperimentalnih doslIdzhen kanatnogo mehanIzmu dlya zavantazhennya malih skladskih primIschen ovochami I fruktami u tarI. SIlskogospodarskI mashini. Vip. 45. 2020. LNTU. Lutsk. Р. 45–56.
  14. Rogatinskiy R. M. Kanatniy mehanIzm zavantazhennya skladskogo primIschennya. Patent UkraYini na korisnu model № 125377 MPK B 65 G 7/08, 25/00 / R. M. Rogatinskiy, Yu. S. Nikeruy, R. B. Gevko, I. G. Tkachenko. Zayavka № u201711503. Zayavl. 24.11.2017. Opubl. 10.05.2018. Byul. № 9.
  15. Nikeruy Yu. S. Kanatniy mehanIzm dlya zavantazhennya skladskogo primIschennya. Patent UkraYini na korisnu model № 130576 MPK B 65 G 7/00 / Yu. S. Nikeruy, R. B. Gevko, I. G. Tkachenko,
    B. V. PogrIschuk, N. V. DobIzha. Zayavka № u201807507. Zayavl. 04.07.2018. Opubl. 10.12.2018. Byul. № 23.
Завантажити

Всі права захищено © 2019. Тернопільський національний технічний університет імені Івана Пулюя.